INSTRUMENTS / GENERATORS
The Drumpad percussion modeling instrument gives you total control over a physically modeled drum and is based on the Drumaxx instrument. Drumpad has been designed to work
with the FL Studio Stepsequencer, so that any number of Channels can be loaded with a Drumpad instrument. Great, but why should you care when the internet is awash with fantastic sounding drum samples? In two words, expressive realism.
Once a drum sound is recorded, the performance and modulation options are limited to filtering, volume or similar 1-dimensional effects. When a single drum sample is triggered in a roll you get the familiar 'machine-gun' effect, it just sounds artificial. Multi-sampled, multi-layered drums can overcome this limitation but need multi-megabyte or even Gigabyte! drum libraries, and even then, you are still limited to the sounds originally recorded. Drumpad is not based on samples or even commonly used 'synthesis' techniques, where oscillators are mixed and the result is 'electronic'. Drumpad is a truly 'modeled' drum, and not just a single drum, Drumpad can model bass drums, hi-hats, snares, realistic and yes electronic sounds too. But what about the traditional 'Achilles' heel' of synthesis, cymbals? We have left the best until last, Drumpad models cymbals & metallic 'ethnic' percussion instruments with ease.
At the core of Drumpad is a model of the drum-head. Here the vibrating membrane is represented in a mesh of inter-connected of points, each given physical properties, mass, inertia, stiffness, damping and all that good physics stuff. For the musician, this means Drumpad can model the drum-head with multiple parameters such as material, thickness, tension and even shape. More importantly the parameters can be modulated in real-time as a function of velocity or external controls. The drum body is also modeled, in terms of size and shape. All this gives you multi-dimensional performance possibilities, a Matrix of variables providing the almost infinite complexity & subtlety of hitting a real drum.
Visit the Drumaxx & Drumpad Image-Line forum for more patches and programming tips.
See a Drumpad Video Tutorial here.
Modeling Controls for the mallet (stick) used to hit the drum.
The drum membrane (skin) has a significant impact on the tonal character of the final sound. There are 4 key parameters - Tension, Phase, Material and Shape. When the right balance between these four controls is achieved, the sound will be most natural. We recommend adjusting Tension and Phase first, so that the pitch is close to what you need. Then adjust Material and Shape to fine-tune the tonal qualities. If the balance is right, the Drum Pad will sound like a drum, and if not, the Drum Pad can sound 'blurry' and 'loose'.
Low cut frequency filtering
The SOF is an 'allpass' filter with a narrow frequency-peak exhibiting high levels of self-oscillation. When the frequency-peak is swept quickly downwards, it is useful to make kicks and snares.
Mid-range frequency filtering. The Mid frequencies also include EG controls (EG Freq & EG Level) that allow modulation of the associated parameters. EG modulations are particularly important for creating more realistic drum sounds.
NOTE: The Mid frequency Freq and Level controls are excellent modulation targets for velocity.
High frequency shelf filtering.
Main output controls.
Velocity can be assigned to 4 modulation targets per Drum Pad. If more control independent of velocity is needed, any of the modeling parameters can be linked to external modulation sources (a mod-wheel for example).
NOTE: You can automate any of the modeling controls using standard automation & modulation techniques.
Drumpad was created by Maxx Claster exclusively for -
Image Line Software BVBA