Double-tapping on a Clip in the Playlist will open the appropriate Editor window. Once open, single-taping on Playlist content will change the Editor Window.
Working with the Piano roll
The piano roll will play notes for any Instruments loaded on the current Playlist track, see Rack.
Add Notes - Tap on the empty grid.
Delete note - Tap and hold note (use delete pop-up).
Note controls - Tap notes to open the Copy, Delete, Snap controls.
Selection - Tap on the background (wait for the selection rectangle to show), drag across notes to be selected and release.
Snap - Short-tap to turn on/off. Long-press to open Snap Options:
Steps 1/6 to 1 (step) - Absolute grid values equal to the nominated fraction of a step.
Beats 1/6 to 1 (beat) - Absolute beats values equal to the nominated fraction of a beat.
Bar - 1 bar.
Converting from Steps/Beats to commonly used note values:
To quantize notes: 1. Set a snap value from the snap icon. 2. Make a note selection and use the Snap option from the note controls popup.
Drum Sequencer & Drum Sampler
The Drum Sequencer has two different types of tracks, 'Stepsequencer Tracks' and 'Note Tracks':
Stepsequencer Tracks - Allows you to quickly create drum rhythms by manually selecting steps to create a drum pattern. The sequencer is available from Playlist tracks of type Drum.
Note Tracks - Created by default, when live-recording via the Drumpads OR from the Channel Menu > Add Notes Track. The Note Tracks allow you to record/edit steps of varying lengths (including complex Snap Settings) which is something that the Stepsequencer Track doesn't offer.
To add a drum sample - Tap the (+) icon at the bottom of the rack and choose another sample to add. This will become a new track.
To replace a drum sample - Long-tap on the track header and choose 'Load sample' and choose a new sample OR with the SAMPLE tab selected tap the waveform icon and choose a new sample.
To save a custom drumset - Long-press the Channel Icon to open the Channel Menu and use 'Save Template'. This will save the current set of drums as a preset so you can load it again later.
To load a custom drumset - Tap the (+) Playlist button to add a track of type Drum Sequencer. Choose from My Drumsets.
Drum Channel Long-press menu:
Load Sample - Opens the sample browser to replace the sample on the current Channel.
Reverse - Reverse the sample on the current Channel.
Clone - Duplicates the current Channel.
Delete - Deletes the current Channel.
Fill beat - Fill each 4 steps.
Fill snare beat - Fill each 8 steps.
Fill 1/2 beat - Fill every second step.
Fill 1/4 beat - Fill all steps.
Clean - Delete all steps.
Working with the Stepsequencer
Add / Remove Steps - Tap Steps. The drum sound will be triggered on each active step.
Swing - Opens a slider that allows you to add a 'swing' rhythm to Steps. Swing affects the length of odd vs even steps. If 4 beats per bar are set, 'swing' holds odd 16th notes (1,3,5,7,9,11,13,15) at the expense of even 16th notes (2,4,6,8,10,12 and 16) in the bar. The control determines the amount of swing.
Add Drums - Tap the (+) button at the bottom of the Stepsequencer. This will open a 'Browser'. You can also choose your own custom samples from the My Samples folder. After adding a sample tap the Env. tab to adjust the ADSR settings for the sample.
Drum Sampler - The Drum Sampler is integrated with the Step Sequencer, and is another instrument specialized for playing single-shot percussion samples. The Drum Track can hold multiple samples making up a drum kit and allowing you to process each sound separately. Use the tabs to access controls:
Mixer - Solo (hear only the selected drum sound), Pan (left/right position in the stereo field) and Level (volume) for the Drum channel.
Sample - The controls include:
Pitch - Master sample pitch. NOTE: There is also a per-step pitch control on the drag-up bar editors tab, as shown above.
Length - Sample play-time. NOTE: A setting of 0 (100% left) is disabled, so start at the right and drag the slider to the left until you reach the desired length. Length interacts with the Envelope > Release setting, which should be set to minimum for the Length setting to have an effect. Afterward you can again tweak Release to achieve a less abrupt ending.
AUX - Sample routing. You can send the audio from the selected sample to any other Effects Track (AUX) for separate processing to the host Drum Track
Wave icon - Load sample. To Change samples tap the Wave icon to open a sample browser. Choose a sample. You can also choose your own custom samples from the My Samples folder. After adding a sample tap the Env. tab to adjust the ADSR settings for the sample.
Custom drum samples - The Drum Sampler will look in the My Recordings, My Samples and My Tracks for WAV (16 / 32 Bit) and MP3 format samples. If you put your own samples in these locations you can load custom drum sounds (as shown in the videos above).
Envelope - Attack, Decay, Sustain and Release envelope.
Long-press menu (as shown above):
Load sample - Replace the existing sample with a new one.
Reverse - Reverse sample.
Clone - Create a new track with the same sample and settings.
Delete - Delete the current sample.
Fill beat - Add steps 1, 5, 9, and 13 (all on-bar beats).
Fill snare beat - Add steps 5 and 13.
Fill 1/2 - Fill odd steps.
Fill 1/4 - Fill all steps.
Clean - Clear all steps.
Add Notes Track - Long-tap the Channel Menu for the Drum Track to add a 'Notes Track'. This will allow you to set Snap values for steps and program in complex timings such as triplets or 1/64th notes.
An Automation Clip moves the target parameter. You can create automation clips for most interface controls. Just move them then use the CTRL menu on the Transport Bar to add an Automation Track for that target.
NOTE: You can drag and select multiple points to delete, mode or copy and paste them.
Creating Automation Clips
You can automate most movable control on FL Studio Mobile. All knobs and sliders. To manually create an automation clip for a target:
When loading an Audio Clip track, FL Studio mobile will make available files in FLM User Files\My Recordings, My Samples & My Tracks. FL Studio Mobile supports 8, 16, 24 and 32 integer and IEEE float waves. *.wav format and .MP3 format. NOTE: MP3 format files include a very short period of silence at the start. This is part of the MP3 conversion process and can put critical timing events in the audio out of sync with the Playlist.
Working with the Wave Editor
Left Tabs - Control Volume, Pan and Pitch with the tabs down the left side.
Tap to add points - Existing points can be dragged.
Delete points - Tap and long-press point. Release to show delete option. Tapping outside points and dragging will allow you to select multiple points.
Vol, Pan, Pitch - Tap tabs to choose an envelope to apply it to the Audio Clip.
Time selection menu - After making a time-line selection there will be a (+) icon, tapping this opens a menu. If the (+) icon is not visible, tap one of the bars of the selection:
Deselect - Remove time-line selection.
Insert silence - Insert time equal to the selection length. Audio straddling the selection, will be sliced at the start of the selection and moved to the right. Time will be added equivalent to the length of the selection.
Duplicate - All Audio in the selection will be sliced at the selection boundaries and copied to the right.
Clear - All Audio in the selection, will be sliced at the Clip boundaries and deleted.
Delete space - All Audio in the selection, will be sliced at the selection boundaries. Both Time and Audio will be deleted, Audio to the right will be moved left.
Trim selection - Audio will be sliced at the selection boundaries and everything outside the selection will be deleted (Time and Audio).
Normalize - Maximize the level of the audio in the selection. A multiplier is applied to all samples so that the loudest sample reaches 100%.
Fade in - Levels will be set from 0% to 100% over the range of the selection.
Fade out - Levels will be set from 1000% to 0% over the range of the selection.
Undo - Undo the last edit.
PRV - Solo preview the Audio while previewing the sample.
Level - Clip volume level.
Pan - Clip Pan (left/right position in the stereo field).
Pitch - Clip Pitch.
REV - Reverse the Clip.
SYNC - Synchronize the Clip to the project tempo. When selected, changing the BPM or Clip Length will change the play duration while pitch will remain fixed.