Newtone is a pitch-correction and time manipulation editor. Slice, warp, correct, edit vocals, instrumentals and other recordings. A
Newtone Video Tutorial series
is available. A related plugin for live pitch manipulation is Pitcher.
The default mode analyzes the file to show pitch, vertical position, and volume, height of notes.
Detected notes display as blocks on the Piano roll. Note volume appears as a background waveform.
There are three indicators:
Orange rectangles show the average pitch for the detected note.
Orange shaded blocks indicate the nearest semi-tone.
Orange line displays the detected pitch at each point.
Global Pitch Control Knobs
Center - Global pitch correction. Scales all notes toward 100% nearest pitch.
Variation - Global pitch variation correction. Controls vibrato and pitch errors.
Transition - Global pitch transition speed between notes.
From left to right:
Cut mode - Select and slice notes by clicking on the desired cut location. In Cut mode hold (Alt) and click on the two slices to be joined. Otherwise use (Shift
+ Alt) when not in Cut mode.
Advanced Edit mode (Double-click) - There are two advanced edit modes selected
from the Edit menu. Pitch edit - Allows the note's properties including Pitch,
Formant, Volume etc., to be edited. When Vibrato edit is selected the tool shows the vibrato functions including frequency, start and end intensity and vibrato volume.
Slaved Playback mode (H) - Playback position will sync to FL Studio's transport
controls (make sure FL Studio is in Song Mode). The bars in Newtone and the Playlist will also be aligned. To start Newtone from a point later in the FL Studio project make a selection in the Playlist from the point where you want Newtone to start. You can disable this behavior by switching 'Ignore host selection' (right-click the slave button to access).
Auto-Scroll mode (A) - The Piano roll will scroll to follow the playback cursor.
Editing options include:
Pitch correction (single note) - (Right-click) notes and they will snap to the
nearest semitone. For unsnapped re-pitching click the Pitch handle, hold (Alt)
and drag vertically.
Pitch correction (of a selection) - Make a selection by holding (Ctrl + click-n-drag) vertically through any note/s to select them and
then click a note on the Piano roll ruler to the left. The selected notes will snap to the selected pitch.
Pitch correction (all notes) - Use the 'Center' (pitch center), 'Variation' (pitch vibrato/ drift) and 'Transition' (legato) knobs. These scale values for all notes simultaneously.
For most corrections you will probably just use these controls and make a few specific note-by note adjustments in Advanced Edit mode.
Fine tune pitch Hold (Alt + drag) the center of the note vertically.
Pitch variation correction - Enter Advanced Edit mode and then double-click the note to activate it. Controls include 'Pitch variation', 'Ramp-in' and 'Ramp-out' on a note-by-note basis (see above). To adjust parameters click on the controls as indicated and
drag in the direction of the arrows.
Formant - Enter Advanced Edit mode and then double-click the note to activate it. Drag vertically on the Formant control as indicated
above. Formants are resonances caused by the size and shape of the vocal tract. Changing the formant will change the apparent size, age or even sex of the vocalist.
Vibrato - Make sure Vibrato Edit mode is selected and then double-click the note to enter Advanced Mode. This
provides control over 'Vibrato frequency', 'Start' and 'End' intensity and volume vibrato envelope on a note-by-note basis.
NOTES: The vibrato control will interact with existing vibrato, so it can be easier to see what you are doing by dialing out the natural vibrato with the variation knob then
bring back some of the natural vibrato later if desired. The vertical green line is fixed and shows the estimated frequency of the natural vibrato in the original sample (if any). The blue line can be moved horizontally
to set the frequency from maximum (far right) to minimum (far left). The start and
end vibrato levels are bi-directional and can be dragged vertically to change amount and phase of the vibrato. The set frequency line marks the division between start and end controls.
Selections and editing - When you make a selection (or select all notes) to change the pitch all notes in the selection will respond. In Advanced Edit mode all notes
will respond to 'parameter level' edits also (e.g. Variation or Formant).
Note positions & boundaries - Clicking and dragging at the edges of the note blocks will move them. Where two notes are joining (as is often the case), the intersection
of both notes will move together. The Snap resolution setting will determine how notes move. To override snap hold
(Alt) while dragging. To create new notes or insert missed notes, use the Cut tool to slice existing notes.
Join 'glue' notes or slices - Hold (Shift + Alt) OR in Cut mode hold
(Alt) then wait for the pointing finger to appear then click the notes to be joined.
Cut, pasted & delete - Follow standard keyboard shortcuts (see below).
Auto-flatten pitch - Select some notes then click a note on the piano roll to set the group pitch.
Select a key for auto-pitching - Select Snap to scale and move notes vertically and they will only jump to notes on the selected scale.
Snap to time grid - Where the audio snaps to is dependent on the snap resolution and which notes are selected.
Vibrato control - In addition to the 'Variation' knob it's possible to impose a simulated vibrato on notes. Select 'Vibrato edit' from the Edit menu then the 'Advanced edit'
display will change to show vibrato controls.
Convert your vocal parts to synthesizer performances - by sending MIDI scores to Piano roll with the 'Send score' button.
Cut mode (Shift) - Or click on the Cut button.
Move note start/end independently Click the Left or Right edge of the note and drag, hold
(Ctrl + drag) left/right to detach it from surrounding notes, if possible.
Move note independently Place the cursor on the front half of the note so the hand cursor appears and drag. Hold
(Ctrl + drag) to
detach the note from surrounding notes, if possible.
Advanced Edit mode (temporary) (Double-click) Double-click the note to be edited. To remain in Advanced Edit model select the Advanced Edit button.
Leave Advanced Edit (Double-click) the Piano roll.
Preview / Scrub - When playback is stopped, click on the middle of a note (where the double-headed vertical arrow appears) and drag horizontally.
Abusing Newtone - in ways for which it was not intended will reward the adventurous.
Warp Editor Overview
To swap to Warp Mode select the Time-Warp Icon as indicated ot select the Disk icon and then 'Time warping from the menu. You will be asked if you want to save any pitch correction edits before changing mode. Warp mode
is designed to work primarily with non-pitched, rhythmic content. See a Newtone Audio Quantization Tutorial.
In warp mode the Global Pitch Control knobs are replaced by:
Density - Controls the number of detected slices. Warp markers are added where transients are detected with Density controlling the detection threshold. Auto-slicing works best with
percussion or other performed-to-a-tempo audio with clearly visible beats. NOTES: Audio longer than 20 seconds is auto-quantized - the beat is detected according to the Density setting and
warp-markers auto-snapped to the tempo grid. For audio less than 20 seconds the Density control is deactivated if slices are already present in the file, as these are used instead.
To check if a sample is pre-sliced open the audio file in Edison and edit slices as needed.
Editing in Time Warping Mode
Percussion/Drum or polyphonic mode includes stretching - Any downbeat markers will be used to determine the start of a bar and then warp markers will be automatically placed at beat boundaries that are detected in the sample.
Set the downbeat - Right-click an existing warp-marker.
Add and remove warp-markers - Double click on the location to add/remove the marker.
Set BPM (F2) - Click the disk icon and select 'Edit properties. Enter the desired BPM
Preview Scrub Click the time-ruler above the slices
General Editor Functions
These operations apply to the editor:
Move the Piano roll in any direction Click (Ctrl + Alt) & drag the mouse OR click the (Middle mouse button) & drag.
Scroll the Piano roll vertically Scroll the mouse wheel.
Scroll horizontally (Shift + mouse wheel).
Zoom horizontally (Ctrl + mouse wheel).
Zoom vertically (Alt + mouse wheel).
Zoom Selection / Zoom Full Make a selection and (Ctrl + Right-click). If nothing is selected this will Zoom Out
to full view.
Loop mode On/Off (L).
Play/Stop (Space Bar) To Pause (Ctrl + Space).
Mode - When switching modes you will be asked if you want to save the current file. If you have made changes compared to the original, then these will
be saved and the file re-opened in the new mode. You can choose to re-open in the new mode without saving your existing changes.
Pitch correction - Correct or edit pitch of monophonic sources.
Time warping - Correct or edit timing of performances.
New - Opens a new (empty) editor window.
Load sample (Ctrl+O) -
Opens a file browser dialog in 'load' mode.
Save sample as (Ctrl+S) -
Opens a file browser dialog in 'save' mode. The pop-up dialog has two options under the 'Save as type' field:
Microsoft wave file (*.wav) Standard lossless
.wav file at the bit-depth and sample rate set in the Sample Properties dialog.
Microsoft compressed wave file (*.wav)Lossy
compression formats. After initiating the save a second dialog opens to save the sample in one of many compressed formats. MS compressed wave files simply wrap the selected compression
type in a *.wav file, and put information in the wave header as to what decompression method the opening program should use (not all programs read this information). FL Studio will load and decompress MS compressed wave files automatically as long as you have
the appropriate codec installed.
WavPack (*.wv) (or Right-click the 'Save as' button) Lossless or lossy,
depending on settings, open-source compression (see the WavPack website for more details). After initiating save in this format
you will be prompted for a bit-depth (lossless is the default, other settings are lossy compression modes). In 'lossless' mode expect between 30-70% reduction in file sizes, useful for archiving purposes. FL Studio will load and decompress WavPack files automatically.
MPEG 3 audio file (*.mp3)Mp3 is a Lossy
compression format. It has gained world-wide popularity because it was one of the first on the market that provided good quality lossy compression. After initiating a save a second dialog opens to select the quality
(bit-rate), this controls the tradeoff between audio quality and file size. Good listening quality on portable devices starts at about 160 kbps, use 224 kbps or 320 (max) if you want something probably indistinguishable from CD quality.
Ogg Vorbis (*.ogg)Lossy, open
source compression format, similar in concept to mp3 (see the
Vorbis or Ogg Wikipedia
website for more details). After initiating a save a second dialog opens to select the quality (bit-rate), this controls the tradeoff between audio quality and file size. Use a setting of 0.50 or
more if you want good quality. FL Studio will load and decompress *.ogg files automatically.
NOTE: Do not use any of the lossy formats (Microsoft compressed wave file, MPEG 3 or Ogg Vorbis) to archive project samples or loops. Use Microsoft wave files or WavPack in lossless compression mode if you want to save space. Hard disk space is cheap,
samples may be irreplaceable.
Save as MIDI - Saves the current pitch detections and manipulations as a MIDI file (.mid).
Export regions in pitch correction mode - Each detected note and slice will be saved with a region marker.
Slave to host playback:
Ignore host selection - Playback will follow the absolute song position in FL. Normally Newtone will align its first bar to start at the beginning of Playlist selections
in FL Studio.
Ignore own selection - Playback isn't limited to the selection in Newtone.
Ignore space bar key - Spacebar is ignored when Newtone is slaved to FL Studio's transport. This avoids the situation where you are editing something in sync with a song,
and each time you edit, if Newtone is in focus, it plays alone instead of with the FL Studio project.
Edit properties (F2) (Or Right-click the title text below the
transport buttons) - Opens a dialog to set BPM and Tempo-sync that causes the sample to stretch with changes to host BPM once imported.
Undo (Ctrl+Alt+Z) OR (Ctrl+Alt+Z) - Undo/Redo OR Undo many.
Cut (Ctrl+X) - Cuts the selection.
Copy (Ctrl+C) - Copy selection.
Paste (Ctrl+V) - Paste selection.
Copy to MIDI clipboard Copies the current note detection to the MIDI clipboard. To send notes to the Piano roll use 'Send to piano roll' below.
Delete (Del) - Delete selection.
Advanced Edit (Ctrl+A) - Toggles Advanced Edit (A) pitch mode.
In A mode the A box will automatically appear when the mouse cursor is placed over a note. Otherwise you can double-click notes to enter Advanced Edit mode.
Vibrato edit - Toggles Advanced Edit (A) vibrato mode. This allows you to fine-tune pitch vibrato effects on individual notes. In A mode the A box will automatically appear when the mouse cursor is placed over a note. Otherwise you can double-click notes to enter Advanced Edit mode.
Cut Mode (C) - Toggles Cut Mode used to Cut/Slice notes.
Snap to scale - Once you start moving notes from their existing locations they will only snap to notes from that scale.
Scale - Select the scale to use in conjunction with the Snap to scale function.
Snap to grid - Set the horizontal snapping from 'none' to '1/8 beat' (32nd notes). Hold (Alt) to temporarily override snap.
Send to Playlist as audio clip - Sends the audio to the Playlist as an Audio Clip with markers set for the note boundaries.
Send to piano roll - Sends the detected notes to the Piano roll as MIDI data.
Deselect (Up arrow) selection.
Select time around selection (Ctrl+Enter) - Selects the time-line range occupied by the selected notes. If no selection is made the Zoomed range will be selected.
Select before current selection - Selects the time-line before the current selection.
Select after current selection - Selects the time-line after the current selection.
Select all - Selects the time-line.
Select all slices (Ctrl + A) - Selects all audio.
Undo - Undo if there is nothing to redo, (Ctrl+Z).
Left-click - Sends the detected score to a Piano roll in the currently selected Channel & Pattern. Right-click Copies the score to the MIDI clipboard.
Left-click Save as a new file. Right-click Save the file as WavePack format (.wv). See the 'File > Save sample as' section for a detailed description of .wv format.
Drag this button and drop on a compatible location in FL Studio (Playlist, Channel window e.t.c,) to copy the selection to that destination. If nothing is selected the entire sample will be
Send selection to Playlist
Sends the selection to the Playlist. If nothing is selected the entire sample will be copied.